Мультиплексор Huawei MA5600 – это устройство широкополосного доступа IP, позволяющее строить оптимальные сети широкополосного доступа и увеличивать их индивидуальную конкурентоспособность.
Устройство обладает конкурентоспособными сервисными функциями и хорошими механизмами обеспечения приоритетного обслуживания. Это позволяет увеличить эффективность использования сети и соответствовать требованиям качества различных услуг.

Для полноценной работы и отработки большинства команд необходимо активировать пользовательский и привилегированный режимы.
Режим пользователя активируется командой enable, привилегированный режим — config

Работа с платами

Добавление платы — board add

Формат команды: board add (frameid/slotid board-type sub0 sub0type sub1 sub1type)

huawei(config)# board add 0/2
board add 0/2 h561shea
Frame 0 slot 2 board added successfully  

Перезагрузка платы — board reset

Формат команды: board reset (frameid/slotid)

huawei(config)# board reset 0/1 

Просмотр плат — display board

Формат команды: display board (frameid slotid)

huawei>display board 0 
----------------------------------------------------------------------- 
  SlotID  BoardName Status         SubType0 SubType1 
----------------------------------------------------------------------- 
  0 
  1       H563ADEF  Normal                                                      
  2       H561EIUB  Failed         O2GS                                         
  3                                                                             
  4                                                                             
  5       H561ADBF  Normal                                                      
  6                                                                             
  7       H561SCU   Active_normal  O2GS                                         
  8                                                                             
  9                                                                             
  10                                                                           

Работа с ADSL

Создание профиля — adsl line-profile add

Формат команды: adsl line-profile add (profile-index)

huawei(config)#adsl line-profile add                  
> Do you want to name the profile (y/n) [n]:y                                 
> Please input profile name:areal                                              
>  Please choose default value type 0-adsl 1-adsl2+ (0~1) [0]:                 
>  Will you set basic configuration for modem? (y/n)[n]:y                      
ADSL transmission mode:                                                        
>  0: All   (G992.1~5,T1.413)                                                  
>  1: Full rate(G992.1/3/5 or T1.413)                                          
>  2: g.lite(G992.2/4) (ADSL over ISDN board doesn't support g.lite mode)      
>  3: T1.413(ADSL over ISDN board doesn't support T1.413 mode)                 
>  4: g.dmt (G992.1/3/5)                                                        
>  5: g.hs  (G992.1~5, G992.5 is prior)                                        
>  6: G992.1                                                                   
>  7: G992.2                                                                    
>  8: ADSL all (G992.1~2,T1.413)                                               
Please select  (0~8) [0]:                                                      
>  Trellis mode 0-disable 1-enable (0~1) [1]:                                   
>  Downstream channel bit swap 0-disable 1-enable (0~1) [0]:                   
>  Upstream channel bit swap 0-disable 1-enable (0~1) [0]:                     
>  Please select channel mode 0-interleaved 1-fast (0~1) [0]:                   
>  Will you set interleaved delay? (y/n)[n]:y                                  
>  Maximum downstream interleaved delay(0~255 ms) [6]:                         
>  Maximum upstream interleaved delay(0~255 ms) [6]:                           
> Please select form of transmit rate adaptation in downstream:               
>  0-fixed 1-adaptAtStartup (0~1) [1]:                                         
>  Will you set SNR margin for modem? (y/n)[n]:y                               
>  Target SNR margin in downstream(0~15 dB) [6]:                               
>  Minimum SNR margin in downstream (0~6 dB) [0]:                              
>  Maximum SNR margin in downstream (6~31 dB) [31]:                            
>  Target SNR margin in upstream (0~15 dB) [6]:                                
>  Minimum SNR margin in upstream (0~6 dB) [0]:                                
>  Maximum SNR margin in upstream (6~31 dB) [31]:                              
>  Will you set parameters for rate? (y/n)[n]:y                                
>  Minimum transmit rate in downstream (32~8160 Kbps) [32]:                    
>  Maximum transmit rate in downstream (32~8160 Kbps) [6144]:                  
>  Minimum transmit rate in upstream (32~896 Kbps) [32]:                       
>  Maximum transmit rate in upstream (32~896 Kbps) [640]:                      
   Add profile 2 successfully 

Просмотр созданных профилей — display adsl line-profile

Формат команды: display adsl line-profile (Profile ID)

RST-SHT-GTS-K.Marksa106-DSL8-H5600(config)#display adsl line-profile
--------------------------------------------------------------------------
Profile  Profile  Operating  Channel     Min Down Max Down  Min Up Max Up
Index    Name       Mode      Mode         Rate      Rate    Rate   Rate
--------------------------------------------------------------------------
1      DEFVAL     All        Interleaved    32      6144      32     640
2      PROFILE 2  All        Interleaved    32      2048      32     512
3      PROFILE 4  All        Interleaved    32      4096      32     640
4      PROFILE 6  All        Interleaved    32      6144      32     640
5      PROFILE 8  All        Interleaved    32      8096      32     896
6      PROFILE 6  G992.1/3/5 Interleaved    32      2048      32     512
7      PROFILE 8  Full rate  Interleaved    32      8096      32     896

Тестирование доступности созданного PVC на абонентском модеме — atm-ping

Формат команды: atm-ping (-c count -t timeout portid vpi vci)

huawei(config-if-adsl-0/11)# atm-ping 31 0 35
ATM-PING adsl0/11/31 0/35, press CTRL_C to break                              
atm-ping successfully. Sequence=0                                            
atm-ping successfully. Sequence=1                                             
atm-ping successfully. Sequence=2                                            
atm-ping successfully. Sequence=3                                            
atm-ping successfully. Sequence=4                                                                                                              
--- Atm-ping adsl0/11/31 0/35 statistics ---                                  
5 oam f5 loopback cells transmitted                                          
5 oam f5 loopback cells received                                             
0.00% cell loss 

Перезагрузка чипсета — chipset reset

Формат команды: chipset reset chipsetId

huawei(config-if-adsl-0/1)#chipset reset 0
Are you sure to reset the chipset? (y/n)[n]:y    

Включение/отключение порта ADSL — activate/deactivate

Формат команды: activate (portID all profile-index profile-index profile-name)

huawei(config-if-adsl-0/1)#activate 0 profile-index 1                                                 
  activate 0 profile-index 1
  Send the command to activate port 0 successfully 

Формат команды: deactivate all | portID

huawei(config-if-adsl-0/1)# deactivate 0
  Deactivate port 0 successfully 

Информация по ADSL порту — display interface adsl

Формат команды: display interface adsl (frameid/slotid/portid)

huawei#display interface adsl 0/1/0                                             
  Adsl  0/ 1/ 0 is down                                                     
  The ADSL link is activating                                                   
  Description : --                                                           
  Bind line-profile No. PROFILE 1                       
  Bind alarm-profile No.   1 DEFAULT                                                                      
  Bind no ext-profile                                                          
  BTV user bind profile name : --                                                                        
  Hardware is ATU-C                                                            
  Last UP time                           : --                                                   
  Last DOWN time                         : --                         
  Current operational mode               : No protocol selected           
  Current downstream Rate                : 0                            
  Current upstream Rate                  : 0                      
  Total count of line training           : 250                           
  Total Up stream cells num (cell)       : 0                           
  Total Up stream packets num (packet)   : 0                                   
  Total Up stream packets num discarded                                        
  due to congestion (packet)             : 0                                   
  Total Down stream cells num (cell)     : 0                                   
  Total Down stream packets num (packet) : 0                                   
  Total Down stream packets num discarded                                      
  due to congestion (packet)             : 0   

Просмотр параметров линии на ADSL порту — display line operation

Формат команды: display line operation (portid all bit-allocation portid snr portid begin include exclude text)

huawei(config-if-adsl-0/1)# display line operation 0                                                   
  Command:                                                                      
          display line operation 0
  -------------------------------------------------------                      
  Channel mode                              : Interleaved                      
  Downstream channel bit swap               : Enable                           
  Upstream channel bit swap                 : Enable                           
  Trellis mode                              : Enable                           
  Standard in port training                 : G.DMT                            
  Downstream channel rate(Kbps)             : 6144                             
  Downstream max. attainable rate(Kbps)     : 7264                             
  Downstream channel SNR margin(dB)         : 18                               
  Downstream interleaved channel delay(ms)  : 4                                
  Downstream channel attenuation(dB)        : 0.0                              
  Downstream total output power(dBm)        : 8                                
  Upstream channel rate(Kbps)               : 640                              
  Upstream max. attainable rate(Kbps)       : 992                              
  Upstream channel SNR margin(dB)           : 17                               
  Upstream interleaved channel delay(ms)    : 5                                
  Upstream channel attenuation(dB)          : 1.5                              
  Upstream total output power(dBm)          : -                                
  ------------------------------------------------------- 

Просмотр статистики интерфейса — display statistics

Формат команды: display statistics (frame/slot/port vpi vci autosense frame/slot groupindex groupindex vpi vci)

huawei# display statistics 0/11/13          
----------------------------------------------------------                   
  Port     Receive cells        Send cells                                     
----------------------------------------------------------                   
  13         101033532          2251452499                                     
---------------------------------------------------------- 

Просмотр сетевой активности на порту — display traffic

Формат команды: display traffic (frame/slot/port table frame/slot/port frame/slot)

huawei#display traffic 0/9/0                          
  Querying, please wait...                                    
  --------------------------------------------------------------  
Frame/Slot/Port       Rx Traffic(Kbps)        Tx Traffic(Kbps)  
  0 /9 /0                    240                     10262 
  --------------------------------------------------------------

Работа с сервисами

Просмотр ARP таблицы — display arp

Формат команды: display arp (all dynamic ip-address static proxy mpls begin include exclude text)

huawei#display arp 
IP Address       MAC Address       VLAN ID    Port        Type
10.71.55.161     0010-5cfb-1ab4    1000       0 /7 /0     Dynamic
10.71.55.252     000d-88f7-524d    1000       0 /7 /0     Dynamic
10.71.55.249     0010-5cbd-dbd8    1000       0 /7 /0     Dynamic

Просмотр VLAN интерфейсов — display port vlan

Формат команды: display port vlan (frameid/slotid/portid)

huawei# display port vlan 0/7/1
--------------------------------
     2211     10     20
--------------------------------
  Total: 3  Native VLAN: 1                     

Просмотр информации по конкретному VLAN — display vlan

Формат команды: display vlan (vlanid)

huawei# display vlan 3
VLAN type: MUX
VLAN attribute: common
Standard port number: 0
------------------------------
Type  State  F/S /P   VPI   VCI
------------------------------
adl   down   0/2 /0     0    32
------------------------------
Service virtual port number: 1

Note: F--Frame, S--Slot, P--Port(or Virtual Port, such as VLAN ID and
      IMA group etc.) The vpi is access-end VLAN ID in vdsl port  

Создание/удаление VLAN интерфейса — vlan

Формат команды: vlan (vlanid to end-vlanid mux smart standard super
undo vlan vlanid to end-vlanid mux smart standard super)

Создание VLAN интерфейсами с номером 2

huawei(config)#vlan 2 super                           

Удаление VLAN интерфейсами с номером 2

huawei(config)#undo vlan 2 super

Просмотр статистики VLAN интерфейса — display statistics vlan

Формат команды: display statistics vlan (vlanID)

huawei(config)# display statistics vlan 4 label 1             
-------------------------------------------------------------------------
VlanID Label UpFlux-Byte DownFlux-Byte UpFlux-Packet  DownFlux-Packet 
-------------------------------------------------------------------------
 4       1      29786         0               67               0                 
-------------------------------------------------------------------------

Очистка статистики VLAN интерфейса — reset statistics vlan

Формат команды: reset statistics vlan (VLAN ID)

huawei(config)# reset statistics vlan 4 label 1   

Работа с IGMP

Просмотр конфигурации IGMP — display igmp proxy

huawei(config-btv)#display igmp proxy
  --------------------------------------------------------
  Program number of license              : 1024
  IGMP mode                              : proxy
  Authorization                          : enable
  Default video VPI                      : 0
  Default video VCI                      : 35
  Robustness variable                    : 2
  General query interval(s)              : 125
  General query response time(0.1s)      : 100
  Specific query interval(0.1s)          : 10
  Specific query response time(0.1s)     : 8
  Specific query number                  : 2
  V1 router present timeout(s)           : 400
  Unsolicited report interval(s)         : 10
  Uplink port mode                       : rstp(0/7/0)
  Log switch                             : enable
  User action report switch              : disable
  Preview switch                         : enable
  Recognition time(s)                    : 30
  The time of reset preview-count        : 04:00:00
  Auto create log interval(h)            : 2
  Right mode                             : profile mode
  Bandwidth management switch            : enable

Просмотр multicast программ — display igmp proxy

Формат команды: display igmp program (current-status all ip (ip-addr) name (name) index (index) begin include exclude text)

huawei(config-btv)# display igmp program all 
----------------------------------------------------------------------
   IP      | Program |Num of  |Uplink|VLAN | Across |Prejoin|Priority 
 Address      name   |watching| port | ID  |  VLAN  |               
----------------------------------------------------------------------
 224.1.1.1 PROGRAM-0     1     0/7/0   10    enable  disable    3 
----------------------------------------------------------------------
  Total: 1 program(s) 

Добавление multicast канала — igmp program add

Формат команды: igmp program add (name ip (ip-addr) vlan (vlanid) bind (frameid/slotid/portid) index (index) priority (priority))

huawei(config-btv)# igmp program add name 1kanal HD ip 224.1.1.1 
vlan 100 bind 0/7/0  index 0

Удаление multicast канала — igmp program delete

Формат команды: igmp program delete (all name (name) ip (ip-addr) index (index))

huawei(config-btv)# igmp program delete all